MP3 audio splitter joiner: Merge multiple files by setting frequencies and other audios parameter

Merge Multiple Files

MP3 Audio Splitter Joiner really realize cutting and marging in just one click. Have you many audio files and want to cut part from them and then join those parts into a new audio files? MP3 Audio Splitter Joiner will be your best choice. Just add those files you want to cut from, set start-time and end-time for every file, then click "Join" button, all those parts will be marged into one file. In MP3 Audio Splitter Joiner, you can adopt files' order by "Up" and "Down" button. MP3 Audio Splitter Joiner is a real time audio encoding/decoding, no disk space will be used when cutting and marging audio files.

To merge multiple files into one big file, please do as below:

1. Click "Add" button or File -> Add File to add the files you want to edit. Multi-add is supported. You can add more than one file by pressing the Ctrl key while clicking the files or pressing the Shift key and using the arrows to select a range of files. MP3 Audio Splitter Joiner supports 4 format: MP3, WAV, WMA and OGG, so you can just add these 4 formats files.
2. Click "Remove" button or File -> Remove File to remove the selected files from the filelist, not from your computer.
3. Click "Clear" button or File -> Clear to clear the filelist, not delete files from from your computer.
4. Set begin-time/end-time for every file. After you add the file, default begin-time is "00:00:00", default end-time is the length of that file, but you can set begin-time/end-time yourself. Set time by pre-listen that song. Single-click on the file to select it, click "Play" button to play it, click " begin" button to change begin-time, click "end" button to change end-time, click "ok" button to notarize.
5. Click "Up"/"Down" button to adjust the file order.
6. Set parameters for created file. Click "Options" and change the parameters. Remember to click "Ok" button to save your setting.
7. Click "Join" button, choose your file's format and output directory for marged file, then MP3 Audio Splitter Joiner will marge the parts into one big file. To stop marging, just click "Stop" button.

Notice:

1. After clicking "Join", if a message as "Don't support this MP3/OGG format, please reset." appears, it because you have set high frequency and low bitrate or have set low frequency and high bitrate. For example, you have set to frequency 48KHz, bitrate 32Kbps. If so, please low the frequency or high the bitrate such as set frequency to 48KHz and bitrate to 128Kbps or set frequency to 8KHz and bitrate to 32Kbps.
2. To listen the file from the start-time to end-time, check "Play".