MP3 audio splitter joiner: Cut piece from audio file or save to different supported files format

Cut Piece from Audio File

MP3 Audio Splitter Joiner is a batch cutter. If you have many files to cut and want to do it at one time, MP3 Audio Splitter Joiner is your best choice. Add the files you want to cut from, set begin-time and end-time for every file, then click "Cut", the files will be cutted and converted one by one. Supports MP3, WAV, WMA and OGG format, you can add these 4 format files and save your files as any of these 4 formats. MP3 Audio Splitter Joiner is real time encoding/decoding, no disk space will be used when cutting audio files. There is a small id3-tag editor built in audio cutter and the id3 information of the original files will be written into the created new files. In other words, the id3 information won't be lost after cutting.

To cut piece from one big audio file, please do as below:

1. Click "Add" button or File -> Add File to add the files you want to edit. Multi-add is supported. You can add more than one file by pressing the Ctrl key while clicking the files or pressing the Shift key and using the arrows to select a range of files. MP3 Audio Splitter Joiner supports 4 format: MP3, WAV, WMA and OGG, so you can just add these 4 formats files.
2. Click "Remove" button or File -> Remove File to remove the selected files from the filelist, not from your computer.
3. Click "Clear" button or File -> Clear to clear the filelist, not delete files from from your computer.
4. Set begin-time/end-time for every file. After you add the file, default begin-time is "00:00:00", default end-time is the length of that file, but you can set begin-time/end-time yourself. Set time by pre-listen that song. Single-click on the file to select it, click "Play" button to play it, click " begin" button to change begin-time, click "end" button to change end-time, click "ok" button to notarize.
5. Set parameters for created file. Click "Options" and change the parameters. Remember to click "Ok" button to save your setting.
6. Choose output format and click "Browse" button to set the output directory for cutting file.
7. Click "Cut" button, then MP3 Audio Splitter Joiner will cut the files in filelist one by one. To stop marging, just click "Stop" button.

Notice:

1. After clicking "Cut", if a message as "Don't support this MP3/OGG format, please reset." appears, it because you have set high frequency and low bitrate or have set low frequency and high bitrate. I mean, 48000 Hz frequency will not accept 8Kbps bitrate, please lower the frequency or high the bitrate such as set frequency to 48KHz and bitrate to 128Kbps or set frequency to 8KHz and bitrate to 32Kbps.
2. To listen the file from the begin-time to end-time, check "Play".