MP3 audio batch converter: Convert WAV, WMA, OGG AND MP3 to VOX by defining parameters

Convert WAV, WMA, OGG AND MP3 to VOX

MP3 Audio Batch Converter supports converting your MP3, WAV, WMA files to VOX files.

To convert MP3, WAV, WMA to VOX or resample VOX, just do as below:

1. Add files by "Add File" or "Add Path". MP3, WAV, WMA and OGG are all accepted. Remove the file by clicking "Remove" or "Clear" button - Just remove the file-recorder from filelist, not really delect them from your computer.
2. Do your settings. You can set the parameters yourself. Just click "Options" button and active the "VOX Setting" page, then you can do your settings. If you are not satisfied with your setting and want to use default setting, just click 'Default' button. By default, Frequency is 80,00Hz. Remember to click "Ok" button after your settings.
3. Choose Output Settings to "VOX", click "Convert", then the conversion will begin. To terminate the conversion, click "Stop" button.

Notice:

1. After clicking "To OGG ", if a message as "Don't support this OGG format, please reset." appears, it because you have set high frequency and low bitrate or have set low frequency and high bitrate. For example, you have set to frequency 48KHz, bitrate 32Kbps. If so, please low the frequency or high the bitrate.
2. VBR stands for "Variable Bit Rate". Using VBR will allow the sampler to vary the bit rate depending on the profile of the incoming audio signal.
3. If you check "Enable Quality", you can use any available values for Bitrate, MinBitrate and MaxBitrate. This parameter affects the convertation speed and the quality of the result file. But any value of Quality is correct for the convertation with any available combination of other parameters.